fe exam prep

Calculating the Velocity of a Falling Ball | FE Exam Prep

May 19, 2022 by Anthony Fasano, P.E. Leave a Comment

In this article, (and video above), we calculate the velocity of a falling ball. A question on this topic would typically be found in the Dynamics section of the FE Exam and therefore will give you a better understanding of what you can expect during the exam. This week’s problem was created and solved by Enrique Ivers, an Engineer in Training.

Question:

The velocity (in m/s) of a falling ball is described by the equation:

What is the acceleration at time t=2s?

Solution:

FE Mechanical Exam Review: Calculating Heat Transfer Through A Concrete Wall

May 3, 2022 by Anthony Fasano, P.E. Leave a Comment

In this article, (and video above), we’re going to calculate the heat transfer through a concrete wall. This question forms part of the Mechanical section of the FE Exam and will give you a better understanding of what you can expect during the exam. This week’s problem was solved by Enrique Ivers, an Engineer in Training.

Question:

A concrete wall is 20 cm thick and has an overall thermal resistance of 0.2 m2 ·°C/W. The temperature difference between the two wall surfaces is 5°C. What is most nearly the heat transfer through the wall?

Solution:

Environmental Engineering Exam: FE Exam Prep

March 9, 2022 by Anthony Fasano, P.E. Leave a Comment

In this article (and video above), we solve the value of an interior angle that forms part of the Civil and Environmental Engineering section of the FE Exam to give you a better understanding of what you can expect during the exam.

Question:

The interior angles of triangular traverse were measured as: angle A 63 +- .01 degrees. angle B 41 +- .03 degrees, and angle C 77 +- .03 degrees. The most probable value for angle B is:

Solution:

FE Exam Prep: Strength of Materials

January 25, 2022 by Anthony Fasano, P.E. Leave a Comment

In this article (and video above), I solve a strength of materials question, similar to one you might encounter during the FE Exam, to give you a better understanding of what you can expect during the exam.

Question:

A steel bar (E = 200 GPa) is stretched with a force of 50 N. If the bar is 4 m long and has a cross-sectional area of 0.5 square meters , what is the approximate elongation?

(A) 1 nm
(B) 2 nm
(C) 3 nm
(D) 4 nm

Solution:

FE Exams In 2021 – New Changes

April 20, 2021 by Anthony Fasano, P.E. Leave a Comment

In this week’s Pass the FE Exam article (and video above), I am going to provide you with a COVID-19 update on the FE Exams in 2021, and talk about what you need to know if you are planning or have already booked your FE Exam.

It is likely for you to have questions about the status of your FE Exams in 2021, like, what is the status, will it require scheduling new exam appointments at this time? The status of Pearson’s global test delivery is changing rapidly due to the spread of COVID-19.

The Pearson VUE-owned test centers are continuing to monitor the situation and make decisions about test center operations in accordance with government and local authorities.

How Long Should I Study for the FE Exam?

March 23, 2021 by Anthony Fasano, P.E. Leave a Comment

How long should I study for the FE Exam is a question asked by many engineers and the answer isn’t as straightforward as you might think. That is why, in this article (and video above) I am going to explain how long I believe you should study for the FE Exam.

So let’s think about the length of study required to pass the FE exam.

Here Are 3 Things To Consider:

The FE Exam Passing Score Is…

March 9, 2021 by Anthony Fasano, P.E. 1 Comment

In this week’s Pass the FE Exam article (and video above), I discuss what FE Exam passing score you will need to achieve to pass the FE Exam.

Firstly, you should know that there is no set number of problems or specific quantitative scores that we can cite as the passing score for the FE Exam, it doesn’t exist.

The exam is scored on a pass or fail scale and NCEES, the organization that administers the exam, does not provide an exact score needed to pass. NCEES has used a term “scaled score” in the past, which is confusing

3 Mistakes To Avoid When Taking the FE Exam

February 16, 2021 by Anthony Fasano, P.E. Leave a Comment

In this post (and video above), I talk about the 3 most common mistakes people make during the FE Exam and how you can avoid making the same mistakes. Thinking about what you shouldn’t be doing can give you a better idea of what you need to be doing during the exam.

FE Exam Statics – Determining the Internal Force in a Truss Member

February 9, 2021 by Anthony Fasano, P.E. Leave a Comment

During the FE Exam you will have to solve problems on internal forces in members. In this post (and video above), I will provide you with a practice problem on determining the internal force in a truss member to help you prepare for these questions.

The following sample problem was provided to us by PrepFE.

PrepFE is one of the most effective FE exam self-study prep services out there and happens to be one of the most affordable too. PrepFE is an app that gives you access to countless sample FE problems to bolster your self study efforts.

You can visit www.prepfe.com/redeem and use the discount code PASS-EXAM-0010 to receive 10% off and get some great FE practice problems.

How to Prep the Week of Your FE Exam

February 2, 2021 by Anthony Fasano, P.E. Leave a Comment

After weeks of studying and preparing for the FE Exam, the final week before the exam has arrived. You’re ready to ace your upcoming exam, but you might be feeling stressed out and not sure if you prepared well enough. The last week prior to the FE exam is extremely important and that is why in this week’s Pass the FE Exam video, you will be provided with five actions you should take during that last week that might be the difference between you passing the FE Exam or not.